Pump Unit №93.1241
A modular process system of FAS type. It is designed to be mounted as part of two underground tanks manufactured by Faskhimmash (volume of 4.6/6.4/8.5/9.2/12/20 cubic metres) with an industrial cover, without a fuel dispenser (can be supplied separately). The pumping system is designed to pump liquefied gas from tanks and supply it to a fuel dispenser. The design of a modular LPG pumping unit provides for its application as part of two tanks at small automobile gas filling stations.
The pumping unit No. 93.1241 is a gas pump with a shut-off valve connection. The pumping unit comprises a by-pass valve, flanges, a solenoid valve, as well as a filling system for liquid and vapour phases.
Cost saving design.
Basic Package
- FD-150 type pumping unit, 2 pcs;
- By-pass valve FAS No. 19333, 2 pcs;
- A pipe to connect liquid phase to a fuel dispenser with insulating flanges DN25, liquid phase;
- A vapour phase pipe with a connection to a RVS 22 fuel dispenser, equipped with an insulating joint;
- Pressure gauge with needle valves, 2 pcs.
All connections on the tank cover are equipped with shut-off valves:
- Ball valve DN25 — filling, vapour and by-pass pipes, 6 pcs.;
- Ball valve DN40 — liquid phase intake pipe, 2 pcs.;
- Strainer filter DN40, at the inlet to each pump unit.
Fitting for additional tank connections:
- Solenoid valve 3/4” on the dispenser connection pipes, 2 pcs.;
- Check valve on the vapour return pipe coming from a dispenser.;
- Check valve on the filling pipe;
- Filling assembly for liquid and vapour phases with filling couplings M 60x4, left-hand;
- A set of pipes used between the tanks and pumping systems for liquid and vapour phases.
Tanks are not included into the delivery package.
14 760 €