Pump Unit №93.0101
A modular process system of FAS type No. 93.0101 designed to pump liquefied propane/butane gas based on the FAS FD-150 pumping unit, configured to be connected to one aboveground tank and a fuel dispenser. This pumping unit can be installed and used within the system of fuel dispensers at a gas filling station. The modular-type pumping unit of FAS type No. 93.0101 is a gas pump with a shut-off valve connection. The pump system is configured to pump 85 litres of liquefied gas per minute at a differential pressure of 10.5 bar under 2,880 rpm.
Fuel dispensers and gas holding reservoirs are not included into the basic delivery package and are purchased separately.
Basic Package
-
FD-150 type pumping unit for propane/butane with multifunction gland sealing:
- Rated capacity: 85 L/min, at a differential pressure of 10.5 bar under 2,880 rpm;
- Input: DN 40, PN 40, DIN 2635;
- Output: DN 25, PN 40, DIN 2635.
-
Explosion-proof electric motor:
- Power: 5 kW;
- Rated voltage: 230/400 V;
- Frequency: 50 Hz;
- Ingress protection: IP 55;
- Explosion protection: EEx e II T3;
- Speed: 2,850 rpm;
- Coupling;
- Protective casing.
- Liquid phase inlet DN50 with a ball valve DN50;
- Liquid phase outlet DN25 with a ball valve DN25 and a check valve;
- By-pass pipe with a valve FAS No. 19333;
- By-pass pipe outlet with a ball valve DN25 on the tank connection line;
- Vapour phase pipe with a ball valve DN20 on the tank connection line;
- Vapour phase compensating pipe assembly DN20 with a filling coupling M 60x4.0, left-hand, with a protective cover;
- Filling pipe DN50 with a ball valve DN50, a check valve and a screwed coupling M 60x4, left-hand, with a protective cover;
- Strainer DN50 on a suction pipe;
- Shut-off, relief and control valves made in accordance with existing regulations;
- Instrumentation and monitoring equipment;
- Discharge system of “Candle” type.
Assembled on a common frame, primed and painted.
392 000 rub.