Electronic Fuel Dispenser FEM N/422/T

Electronic fuel dispenser FEM 400 type, with 2 fuelling hoses (located on the diagonal sides), with 2 turbine meters (USA) and electronic components by FASENERGOMASH (Russia).

The dispenser is intended to supply consumer with liquefied petroleum gas in litres.

Information on the Display Panel

• Price per litre;
• Number of dispensed litres;
• Total cost.

Additional information data (when switching the display): summing data on the number of dispensed litres.

Casing Design

• Stainless steel;
• RAL colour as specified by the customer.

Electronic Components

• Electronic components are manufactured by FASENERGOMASH, LLC (Russia);
• Power supply node 230 V AC / 50 Hz;
• Panel for taking meter readings in litres and kilograms;
• One LCD display panel;
• Rotary switch;
• Electronics allows selection of a data communication protocol given the remote control of a dispenser or the connection of additional devices in the following designs: control independently of network connections (local dispenser’s control panel); compatible with DART and AZT 2.0 protocols; self-contained operation without a cash system.
• Operation simultaneously with level gauges (if an electrical control panel is available);
• Operation simultaneously with a pump (if an electrical control panel is available);
• Operation simultaneously with solenoid valves (if an electrical control panel is available).

Hydraulic System PN 25

• Two turbine meters for liquefied petroleum gas, 5–50 L/min.;
• Vapour phase separator;
• Differential valve;
• Two high-pressure hoses, 5 m in length each;
• Quick coupling on the hose;
• ReGo relief valves, actuation pressure: 25 bar;
• Filling clamp (of T3 or R1 type) according to the customer’s specifications;
• Solenoid valve (a two-stage valve is supplied at extra charge);
• Mounting components, inlet/liquid phase: ball valve with coupling DN25;
• Mounting components, outlet/vapour phase: ball valve with coupling DN20.

Additional Equipment for an Extra Charge

• Electrical heating of electronic components;
• Dielectric flanges for installation of underground pipelines;
• Two-stage solenoid valve.

* The arrangement of elements may differ from those shown in the pictures. FASENERGOMASH, LLC reserves the right to introduce technical changes.