Modular Gas Filling, Dispensing and Pumping Station with Two Pumps of FD-150 Type for Connection of Two Underground Tanks

A modular process system of FEM type. It is designed to be mounted as part of two underground tanks manufactured by FASENERGOMASH (volume of 4.6/6.4/8.5/9.2/12/20 cubic metres) with an industrial cover, without a fuel dispenser (can be supplied separately). The pumping system is designed to pump liquefied gas from tanks and supply it to a fuel dispenser. The design of a modular LPG pumping unit provides for its application as part of two tanks at small automobile gas filling stations.

The pumping unit No. 93.1241 is a gas pump with a shut-off valve connection. The pumping unit comprises a by-pass valve, flanges, a solenoid valve, as well as a filling system for liquid and vapour phases.

Cost saving design.

Basic Package:

• FD-150 type pumping unit, 2 pcs;
• By-pass valve, 2 pcs;
• A pipe to connect liquid phase to a fuel dispenser with insulating flanges DN25, liquid phase;
• A vapour phase pipe with a connection to a RVS 22 fuel dispenser, equipped with an insulating joint;
• Pressure gauge with needle valves, 2 pcs.

All connections on the tank cover are equipped with shut-off valves:

• Ball valve DN25 — filling, vapour and by-pass pipes, 6 pcs;
• Ball valve DN40 — liquid phase intake pipe, 2 pcs;
• Strainer filter DN40, at the inlet to each pump unit.

Fitting for additional tank connections:

• Solenoid valve 3/4” on the dispenser connection pipes, 2 pcs;
• Check valve on the vapour return pipe coming from a dispenser;
• Check valve on the filling pipe;
• Filling assembly for liquid and vapour phases with filling couplings M 60x4, left-hand;
• A set of pipes used between the tanks and pumping systems for liquid and vapour phases.

Tanks are not included into the delivery package.