Screw-Type Compressor Unit VDM № 667.311 (100 m³/hour) for LPG
Screw-Type Compressor Unit for LPG pumping with a capacity of 100 m³/hour. Made in Germany.
Technical Characteristics
- Design pressure 18 bar;
- Compressor capacity at a differential pressure of 7 bar is 100 m³/h;
- Explosion protection class EExII;
- Explosion-proof electric motor 7.5 kW, 3000 rpm;
- The maximum rotation of the compressor shaft is 9000 rpm;
- Maximum differential pressure is 10 bar;
- Minimum screw compression ratio is 1: 3;
- Compressor unit RC100LPG;
- The screw compact module is equipped with a multifunctional unit, which includes an oil thermostat, an oil filter, separator cartridges for fine filtering, a minimum pressure valve, a back-pressure valve with a return oil line and a sight glass. The preliminary residual oil content in the gas is 1-3 mg per 1 m³ of gas;
- Coupling with plug for inlet pressure sensor;
- Coupling with plug for outlet pressure sensor;
- Sensor for monitoring the oil level in the compressor cavity;
- Coupling with a plug for the level sensor in the trap at the VEGASWING input;
- Temperature sensor PT100 of the working cavity of the compressor;
- Safety relief valve on the discharge line 16 bar;
- Four-way ball valve for changing the direction of movement of the product;
- Strainer on the suction line;
- Liquid phase and condensate Trap at the inlet;
- Pressure gauges at the inlet and outlet of the compressor;
- Connections: input and output flanges DN40, DIN2635.
Options
- Minimum pressure sensor;
- Maximum pressure sensor;
- Sensor in the Trap;
- Differential pressure sensor.
Electrical control panel for compressor unit
Basic execution of control panels includes:
- Main switch on the side wall of the control panel;
- Current leakage automated device at the input
- Emergency shutdown system with shock button connection terminals;
- Frequency converter with smooth start and stop of the motor;
- Oil Control in the compressor cavity;
- Terminals for connecting gas and fire sensors;
- Buttons for unlocking and disabling the signal on the front panel of the shield;
- Warning lights for unit operation status.
ATTENTION!!! Control panels for placement outside the hazardous area!!!
Options
- Minimum pressure sensor;
- Maximum pressure sensor;
- Sensor in the Trap;
- Differential pressure sensor.
* The arrangement of elements may differ from those shown in the pictures. FASENERGOMASH, LLC reserves the right to introduce technical changes.